DAIKIN LOGO

  • User Guide
  • Download Full manual PDF
  • Back

FAQ

Indoor unit
The flap does not start swinging immediately.
  • The air conditioner is adjusting the position of the flap.
    The flap will start moving soon.
Operation does not start soon.

When the unit is turned on again soon after being turned off.

When the mode was reselected.

  • This is to protect the air conditioner. You should wait for about 3 minutes.
Different sounds are heard.

A sound like flowing water

  • This sound is generated because the refrigerant in the air conditioner is flowing.
  • This is a pumping sound of the water in the air conditioner and can be heard when the water is pumped out from the air conditioner during COOL or DRY operation.

Ticking sound

  • This sound is generated when the cabinet and frame of the air conditioner slightly expand or shrink as a result of temperature changes.

Clicking sound during operation or idle time

  • This sound is generated when the refrigerant control valves or the electrical parts operate.

Clopping sound

  • This sound is heard from the inside of the air conditioner when the exhaust fan is activated while the room doors are closed. Open the window or turn off the exhaust fan.

Rotating machinery causes sound

  • Sound is heard when the horizontal swing flap moves.
  • When the air conditioner is operating in a quiet environment and the airflow rate of the indoor unit is set to Quiet Mode or Low Mode, the motion of the swing flap may cause sounds.
Close
Outdoor unit
The outdoor unit emits water.

In COOL or DRY operation

  • Moisture in the air condenses into water on the cool surface of the outdoor unit piping and drips.
Close
Copyright (C) 2022 DAIKIN INDUSTRIES, LTD.,
pagetop