Full manual PDF
ON/OFF TIMER operation
Timer functions are useful for automatically switching the air conditioner on or off at night or in the morning. You can also use the ON TIMER and OFF TIMER together.
ATTENTION
In the following cases, set the timer again.
- After the circuit breaker has turned off.
- After a power failure.
- After replacing the batteries in the remote controller.
ON TIMER operation
To set
-
Press
.
-
“
” appears on the LCD.
-
“
-
Press until the time setting reaches the point you like.
- Each pressing of button increases the time setting by 1 hour.
- Setting time can be increased to 12 hours maximum.
-
The TIMER lamp lights orange.
Display
To cancel
-
Press
.
-
“ ” disappears from the LCD.
- The TIMER lamp goes off.
Close
OFF TIMER operation
To set
-
Press
.
-
“
” appears on the LCD.
-
“
-
Press until the time setting reaches the point you like.
- Each pressing of button increases the time setting by 1 hour.
- Setting time can be increased to 12 hours maximum.
-
The TIMER lamp lights orange.
Display
ATTENTION
NIGHT SET mode
- When the OFF TIMER is set, the air conditioner automatically adjusts the temperature setting (0.5°C up in COOL) to prevent excessive cooling during sleeping hours.
To cancel
-
Press
.
-
“ ” disappears from the LCD.
- The TIMER lamp goes off.
Close
ON/OFF TIMER combination
To combine
A sample setting for combining the 2 timers is shown below.
– When setting while unit is operating.
– When setting while unit is operating.
[Example]
|
Turn off unit in the next 1 hr. Turn on unit in the next 8 hr. |
Combined |
– When setting while unit is stopped.
[Example]
|
Turn on unit in the next 2 hr. Turn off unit in the next 5 hr. |
Combined |
Close
