POWERFUL operation

All content

POWERFUL operation quickly maximises the cooling effect in any operation mode. In this mode, the air conditioner operates at maximum capacity.

To start

“ ” appears on the LCD.
POWERFUL operation ends in 20 minutes. Then the system automatically operates again with the previous settings which were used before POWERFUL operation.

NOTE

When button is pressed within 10 seconds after press or to start COOL or DRY operation, the air conditioner will work in quick cooling operation, the compressor and indoor fan will work at high speed to help cooling faster than normal POWERFUL operation under the condition that the indoor temperature level will be 25~37°C DB/outdoor temperature level will be 25~43°C DB.
POWERFUL operation can only be set when the unit is running. Pressing causes the settings to be cancelled, and “ ” disappears from the LCD.
POWERFUL operation will not increase the capacity of the air conditioner if the air conditioner is already in operation with its maximum capacity demonstrated.
- In COOL operation
  To maximise the cooling effect, the capacity of outdoor unit increases and the airflow rate becomes fixed at the maximum setting. The temperature and airflow settings cannot be changed.
- In DRY operation
  The temperature setting is lowered by 2.5°C and the airflow rate is slightly increased.
- In FAN ONLY operation
  The airflow rate is fixed at the maximum setting.

POWERFUL + ECONO
POWERFUL + COMFORT AIRFLOW	Not available*
POWERFUL + OUTDOOR UNIT QUIET

* Priority is given to the function of whichever button is pressed last.

To cancel