Full manual PDF
COOL · DRY · FAN operation
The air conditioner operates with the operation mode of your choice.
[COOL]
To lower the temperature in the room
[DRY]
To reduce the humidity in the room
[FAN]
This mode is valid for fan only
To lower the temperature in the room
[DRY]
To reduce the humidity in the room
[FAN]
This mode is valid for fan only
To start
-
Press
and select an operation mode.
- Each pressing of the button changes the mode setting in sequence.
-
Press
.
-
“
” appears on the LCD.
-
COOL/DRY/FAN operation
The OPERATION lamp lights green. - Operation mode can be changed while operating by pressing your desired operation mode button.
Display -
“
NOTE
Note on COOL operation
- This air conditioner cools the room by releasing the heat in the room outside. Therefore, the cooling performance of the air conditioner may be degraded if the outdoor temperature is high.
Notes on DRY operation
- The computer chip works to rid the room of humidity while maintaining the temperature as much as possible. It automatically controls temperature and airflow rate, so manual adjustment of these functions is unavailable.
Note on FAN operation
- This mode is valid for fan only.
Close
To stop
Press
again.
- Then OPERATION lamp goes off.
Close
To change the temperature setting
Press
.
-
Press
to raise the temperature and press 
to lower the temperature. Each pressing of the button changes the temperature by 0.5°C.
| COOL operation |
16.0~32.0°C |
|---|---|
| DRY or FAN operation |
The temperature setting cannot be changed. |
Close
