Full manual PDF
COOL · DRY · FAN ONLY operation
The air conditioner operates with the operation mode of your choice.
[COOL]
To lower the temperature in the room
[DRY]
To reduce the humidity in the room
[FAN ONLY]
This mode is valid for fan only
To lower the temperature in the room
[DRY]
To reduce the humidity in the room
[FAN ONLY]
This mode is valid for fan only
To start
Press button of your desired operation mode.
-
COOL operation
-
Press
. “ 
” appears on the LCD
-
Press
-
DRY operation
-
Press
. “ 
” appears on the LCD
-
Press
-
FAN ONLY operation
-
Press
. “ 
” appears on the LCD
-
Press
-
- COOL/DRY/FAN ONLY operation. The OPERATION lamp lights green.
- Operation mode can be changed while operating by pressing your desired operation mode button.
Display
NOTE
Note on COOL operation
- This air conditioner cools the room by releasing the heat in the room outside. Therefore, the cooling performance of the air conditioner may be degraded if the outdoor temperature is high.
Notes on DRY operation
- The computer chip works to rid the room of humidity while maintaining the temperature as much as possible. It automatically controls temperature and airflow rate, so manual adjustment of these functions is unavailable.
- When the indoor temperature rises, COOL operation automatically starts.
Note on FAN ONLY operation
- This mode is valid for fan only.
Close
To stop
Press
.
- Then OPERATION lamp goes off.
Close
To change the temperature setting
Press
.
-
Press
to raise the temperature and press 
to lower the temperature. Each pressing of the button changes the temperature by 0.5°C.
| COOL operation |
16.0~32.0°C |
|---|---|
| DRY or FAN ONLY operation |
The temperature setting cannot be changed. |
Close
