Full manual PDF
COOL · FAN · DRY operation
The air conditioner operates with the operation mode of your choice.
[COOL]
To lower the temperature in the room
[FAN]
This mode is valid for fan only
[DRY]
To reduce the humidity in the room
To lower the temperature in the room
[FAN]
This mode is valid for fan only
[DRY]
To reduce the humidity in the room
To start
-
Tap ”
” on the screen.
- Tap button of your desired operation mode.
-
COOL operation
-
Tap “
” on the screen
-
Tap “
-
FAN operation
-
Tap “
” on the screen
-
Tap “
-
DRY operation
-
Tap “
” on the screen
-
Tap “
-
- COOL/FAN/DRY operation. The OPERATION lamp lights up.
- Operation mode can be changed while operating by pressing your desired operation mode button.
NOTE
Note on COOL operation
- This air conditioner cools the room by releasing the heat in the room outside. Therefore, the cooling performance of the air conditioner may be degraded if the outdoor temperature is high.
Note on DRY operation
- The computer chip works to rid the room of humidity while maintaining the temperature as much as possible. It automatically controls temperature and airflow rate, so manual adjustment of these functions is unavailable.
- When the indoor temperature rises, COOL operation automatically starts.
Note on FAN operation
- This mode is valid for fan only.
Close
To stop
-
Tap ”
” on the screen.
- The OPERATION lamp goes off.
Close
To change the temperature setting
-
Tap ”
” on the screen.
-
Tap
to raise the temperature and tap 
to lower the temperature.
Each pressing of the button changes the temperature by 0.5°C.
| COOL operation |
16.0~32.0°C |
|---|---|
| DRY or FAN operation |
The temperature setting cannot be changed. |
- Adjust temperature quickly, tap the temperature bar.
Close
