DAIKIN

  • DownloadFull manual PDF
  • Generic selectors
    Exact matches only
    Search in title
    Search in content
  • Back
Back
CLOSE
Generic selectors
Exact matches only
Search in title
Search in content
MOLD PROOF operation

MOLD PROOF operation

The inside of the air conditioner is dried to reduce the occurrence of mold and odour.
MOLD PROOF operation
To operate automatically

To set

Press Mold proof and hold the button for 2 seconds.

  • “ Mold ” appears on the LCD.
  • After DRY or COOL operation stops, the air conditioner starts MOLD PROOF operation automatically.
  • The MOLD PROOF operation lamp and FLASH STREAMER AIR CLEANING operation lamp light green.
Display
Display

To cancel the automatic setting

Press Mold proof and hold the button for 2 seconds one more time.

  • “ Mold ” disappears from the LCD.

To stop operation midway

Press Mold proof twice.

Flow of function for automatic operation

Flow of function for automatic operation
Close
To operate manually

To start

Press Mold proof for about 2 seconds within 3 minutes after turning off the air conditioner.

ATTENTIONATTENTION
  • If the air conditioner is turned off for more than 3 minutes, press Mold proof for about 2 seconds twice to start MOLD PROOF operation.
  • “ Mold ” blinks on the LCD, and the display returns to normal after a while.
  • The MOLD PROOF operation lamp lights green and the FLASH STREAMER AIR CLEANING operation lamp lights up.
Display
Display
  • This operation is one time only. It is recommended to operate MOLD PROOF operation about once a month if you are not using automatic setting.

To stop

Press Mold proof twice.

Flow of function for manual operation

Flow of function for manual operation
Close
Notes on MOLD PROOF operation
  • This operation dries the inside of the air conditioner while streamer discharge is performed to reduce the development of mold and odour inside the air conditioner. However, the function does not remove any adhered dust and mold.
  • MOLD PROOF operation is not available when the unit is turned off using the OFF TIMER or turned off using a smartphone.
  • The flaps may sometimes close to increase the drying effect inside the air conditioner.
  • MOLD PROOF operation may not be performed if the COOL or DRY operation time is short.
  • If MOLD PROOF operation does not suit your preference, set operation to “OFF”.
Close
Relation between MOLD PROOF operation and indoor unit lamps
Air conditioner Lamp status
Operating Operating MOLD PROOF setting is “ON” MOLD PROOF setting is “ON”
  • 1
    Lights up
  • 2
    Depends on STREAMER setting
MOLD PROOF setting is “OFF” MOLD PROOF setting is “OFF”
  • 1
    Goes off
  • 2
    Depends on STREAMER setting
Not Operating Not Operating MOLD PROOF setting is “ON” MOLD PROOF setting is “ON”
  • 1
    Lights up
  • 2
    Lights up
Close
Copyright (C) 2022 DAIKIN INDUSTRIES, LTD.,
pagetop