Full manual PDF
INTELLIGENT EYE operation
The INTELLIGENT EYE operation detects human movement. If no one is detected in the room for more than 20 minutes, the unit automatically enters energy saving operation.
To start
CAUTION
- Do not place large objects near the INTELLIGENT EYE sensor. Also keep heating units and humidifiers outside the sensor’s detection area. This sensor can detect undesirable objects.
- Do not hit or violently push the INTELLIGENT EYE sensor. This can lead to damage and malfunction.
Press
.
-
”
” appears on the LCD.
Close
To cancel
Press
again.
-
” ” disappears from the LCD.
Close
How INTELLIGENT EYE operation works
If no one is in the room for more than 20 minutes, the operation automatically changes to energy saving operation.
[Example]
| People are detected in the sensing area. | |
|---|---|
| The air conditioner is in normal operation while the sensor is detecting human movement. |  |
| No people are detected in the areas. | |
| The air conditioner will switch to energy-saving mode after 20 minutes. |  |
NOTE
Notes on INTELLIGENT EYE operation
-
Application range is as follows.
-
When the air conditioner is function in INTELLIGENT EYE operation, if no people are detected in the areas for 20 minutes, the air conditioner switches to the energy-saving mode with the set temperature shifted by 2°C.
The air conditioner may switch to the energy-saving operation even if there are people in the areas. It may happen depending on the clothes people are wearing if there are no movements of the people in the areas. - The sensor may not detect moving objects further than 7m away. (Please see the application range)
- Sensor detection sensitivity changes according to the indoor unit location, the speed of passers-by, temperature range, etc.
- The sensor could also mistakenly detect pets, sunlight, fluttering curtains and light reflected off of mirrors as passers-by.
- NIGHT SET mode will not switch on during use of INTELLIGENT EYE operation.
Close
INTELLIGENT EYE operation is useful for energy saving
Energy saving operation
- If no presence detected in the room for 20 minutes, the energy saving operation will start.
- This operation changes the temperature by +2°C in COOL / +2°C in DRY operation from the set temperature. When the room temperature exceeds 30°C, the operation changes the temperature by +1°C in COOL / +1°C in DRY operation from the set temperature.
- This operation decreases the airflow rate slightly in FAN operation only.
Close
